PicassoII

[ReDeX]

Ciao a tutti. Qualcuno sa dirmi qual'e` la frequenza orizzontale e verticale massima supportata dalla suddetta scheda?
Grazie.

[Fab0569]

Qui trovi qualcosai: http://www.amiga-hardware.com/picassoii.html

Altre info:

Cirrus Logic GD5426 or GD5428
85 MHz in 8 bit modes
45 MHz in 16 bit
28 MHz in 24 bit
1 or 2 MB 45 or 60 ns DRAM
1 MB (eight DIPs) soldered to board
eight DIP sockets for additional 1 MB
accepts 256k×4 DIPs, 45-80 ns
screen modes
1600×1280×8 interlace
1152×864×16 interlace
800×600×24 non-interlace
optional video encoder module - Pablo ()
FBAS and S-VHS outputs
only PAL compatible
15 kHz overload protection
requires a time base corrector if used with a genlock
notes
maps its memory directly into the Zorro II address space - speeds up manipulation of graphics memory but limits the amount of fast RAM to 6 MB
with 8 MB Zorro II fast RAM the board has to be run in segmented mode - lower performance
two 15 pin VGA connectors
automatic passthrough
Picasso96, CyberGraphX 2, 3 & 4, EGS and PicassoRTG drivers
supported by Linux and NetBSD

Questa è la versione II+:
Cirrus Logic GD5428
30 MB/s blitter speed
85 MHz in 8 bit modes
45 MHz in 16 bit
28 MHz in 24 bit
2 MB 45 ns DRAM in four sockets
screen modes
1600×1280×8 interlace
1152×864×16 interlace
800×600×24 non-interlace
optional video encoder module - Pablo
FBAS and S-VHS outputs
only PAL compatible
15 kHz overload protection
brightness control
requires a time base corrector if used with a genlock
notes
two 15 pin VGA connectors
automatic passthrough
DPMS support
Picasso96, CyberGraphX 2, 3 & 4, EGS and PicassoRTG drivers
supported by Linux and NetBSD

Spero di essere stato utile.

[ReDeX]

Spero di essere stato utile.

Si, grazie mille.